top of page

ASME (AMERICAN SOCIETY OF MECHANICAL ENGINEERS)

  • A New Research Method for Corrosion Defect in Metal Pipeline by Using Pulsed Eddy Current

  • An Engineer’s Guide to Eddy Current Testing

  • Analytical and Experimental Approaches for the Sizing of Fatigue Cracks in Inconel Welds by Eddy Current Examination

  • Basic Characteristics of Eddy Current Testing Using Resonant Coupling

  • Real-Time Eddy Current Imaging and Flaw Detection Under Tube Support Plate by Cylinder-Type Magnetic Camera

  • Remote Field Eddy Current Testing Technology for Ferromagnetic Heat Exchanger Tubes

  • Remote Field Eddy Current Testing Technology for Ferromagnetic Heat Exchanger Tubes

  • Remote Field Eddy Current Testing Technology for Ferromagnetic Heat Exchanger Tubes 

  • Parametric Study on Determining Optimal Eddy Current Testing Method for Inspection of Steam Generator Tubes in SMART Plant

  • Crack Sizing of Deep Cracks in Eddy Current Testing Using 3D Electromagnetic Field Analysis

  • Severed Tubes in Operating Nuclear Steam Generators: Case Analysis — I

  • Severed Tubes in Operating Nuclear Steam Generators: Case Analysis — II

  • Analytical and Experimental Approaches for the Sizing of Fatigue Cracks in Inconel Welds by Eddy Current Examination

  • Identification and Quantitative Analysis of Defect in Plates Based on Remote-Field Eddy Current Method

  • Block Monitoring Method of SG Tube Support Plate With Intelligent ECT for Maintenance Work

  • Evaluation for Nondestructive Crack Sizing Capability on Cracked Surface Treated by Water Jet Peening

  • Characterizing Austenitic Materials and Nickel Alloys With Electro-Magnetic Imaging

  • Selection of Tube Samples for Inservice Inspection of Steam Generator Tubes

  • Real-Time Eddy Current Imaging and Flaw Detection Under Tube Support Plate by Cylinder-Type Magnetic Camera

  • The Method for Structural Reliability Estimation of the Heat Exchanger Tubes of Steam Generator of WWER NPPs

  • Severed Tubes in Operating Nuclear Steam Generators: Case Analysis — II

  • Inspection Method of Finned Tube and Finned Heat Exchanger

  • A New Research Method for Corrosion Defect in Metal Pipeline by Using Pulsed Eddy Current

  • Study on Low Frequency AC Excitation Magnetic Flux Leakage Testing for Defects With Different Depths

  • Eddy Current Techniques to Detect Incipient Creep Damage of Stainless Steel Boiler Tube

  • The Geometry of Steam Generator Tube and Its Relevance to the Occurrence of Stress Corrosion Cracking in Operating Nuclear Power Plants

  • Monitoring Degradation in Nuclear Reactors

  • Age-Related Degradation of Steam Generator Internals Based on Industry Responses to Generic Letter 97-06

  • Finite Element Simulations of the Remote Field Eddy Current Signal in Steam Generator Tubes of Monju Fast Breeder Reactor

 

See a full list on the ASME website.

​

​

​​​​

​​

ISO (International Organization for Standardization)

ISO 12718:2019 Non-destructive testing — Eddy current testing — Vocabulary

https://www.iso.org/standard/75549.html

​

ISO 15549:2019 Non-destructive testing — Eddy current testing — General principles

https://www.iso.org/standard/75550.html

​

ISO 20669:2017 Non-destructive testing — Pulsed eddy current testing of ferromagnetic metallic components

https://www.iso.org/standard/68784.html

​

ISO 15548-1:2013 Non-destructive testing — Equipment for eddy current examination. Part 1: Instrument characteristics and verification

https://www.iso.org/standard/62836.html

​

ISO 15548-2:2013 Non-destructive testing — Equipment for eddy current examination. Part 2: Probe characteristics and verification

https://www.iso.org/standard/62837.html

​

ISO 15548-3:2008 Non-destructive testing — Equipment for eddy current examination. Part 3: System characteristics and verification

https://www.iso.org/standard/43741.html

​

ISO 20339:2017 Non-destructive testing — Equipment for eddy current examination — Array probe characteristics and verification

https://www.iso.org/standard/67744.html

​

ISO 17643:2015 Non-destructive testing of welds — Eddy current testing of welds by complex-plane analysis

https://www.iso.org/standard/61100.html

​

​ISO 25902-1:2009 Titanium pipes and tubes — Non-destructive testing. Part 1: Eddy-current examination

https://www.iso.org/standard/43310.html

​

ISO 10893-2:2011 Non-destructive testing of steel tubes. Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections

Published (Edition 1, 2011)

https://www.iso.org/standard/44664.html

​

ISO 2360:2017 Non-conductive coatings on non-magnetic electrically conductive base metals — Measurement of coating thickness — Amplitude-sensitive eddy-current method

https://www.iso.org/standard/69943.html

​

ISO 20890-5:2020 Guidelines for in-service inspections for primary coolant circuit components of light water reactors. Part 5: Eddy current testing of steam generator heating tubes

https://www.iso.org/standard/70713.html

​

ISO 21968:2019 Non-magnetic metallic coatings on metallic and non-metallic basis materials — Measurement of coating thickness — Phase-sensitive eddy-current method

https://www.iso.org/standard/73285.html

​

ISO 11484:2019 Steel products — Employer's qualification system for non-destructive testing (NDT) personnel

https://www.iso.org/standard/69804.html

​

ISO 14691:2008 Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — General-purpose applications

https://www.iso.org/standard/45476.html

​

ISO/TS 25107:2019 Non-destructive testing — NDT training syllabuses

https://www.iso.org/standard/71997.html

​

ISO 19840:2012 Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces

https://www.iso.org/standard/59523.html

​

ISO 10893-1:2011 Non-destructive testing of steel tubes Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leak tightness

https://www.iso.org/standard/44662.html

​

ISO 10893-2:2011/1:2020 Non-destructive testing of steel tubes — Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections Amendment 1: Change of dimensions of the reference notch; change acceptance criteria

https://www.iso.org/standard/78812.html

​

ISO 24584:2022 Textiles — Smart textiles — Test method for sheet resistance of conductive textiles using non-contact type

https://www.iso.org/standard/78999.html

​

ISO 10441:2007 Petroleum, petrochemical and natural gas industries — Flexible couplings for mechanical power transmission — Special-purpose applications

https://www.iso.org/standard/35107.html

​

ISO 9712:2021 Non-destructive testing — Qualification and certification of NDT personnel

https://www.iso.org/standard/75614.html

​

ISO 20807:2004 Non-destructive testing — Qualification of personnel for limited application of non-destructive testing

https://www.iso.org/standard/34273.html

​

ISO/CD 25120-1 Non-destructive testing of welds — Eddy current testing. Part 1: General

https://www.iso.org/standard/89007.html

 

ISO/CD 25120-2 Welding and allied processes - Eddy current array testing. Part 2: Acceptance criteria

https://www.iso.org/standard/89008.html

​

ISO/CD 15548-1 Non-destructive testing — Equipment for eddy current examination. Part 1: Instrument characteristics and verification

https://www.iso.org/standard/87406.html

​​​​​​​​

ASTM Standards and Papers

WK82290 New Practice for Pulsed Eddy Current Examination of Ferromagnetic Materials https://www.astm.org/workitem-wk82290

 

WK86698 New Test Method for Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys Using The Eddy Current Method https://www.astm.org/workitem-wk86698

 

WK89196 Revision of E2934-23 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods https://www.astm.org/workitem-wk89196

 

WK86626 Revision of E243-18 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes

https://www.astm.org/workitem-wk86626 

 

WK78872 Revision of E309-16 Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation

https://www.astm.org/workitem-wk78872

 

 WK89116 Revision of E571-19 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products https://www.astm.org/workitem-wk89116

 

WK89194 Revision of E376-19 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods https://www.astm.org/workitem-wk89194

 

WK89193 Revision of E566-19 Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals https://www.astm.org/workitem-wk89193

 

WK90157 Revision of E1312-18 Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature https://www.astm.org/workitem-wk90157

 

WK90938 Revision of B244-09(2021) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments https://www.astm.org/workitem-wk90938

 

E215-22 Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube https://www.astm.org/e0215-22.html

 

E243-24 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes https://www.astm.org/e0243-24.html

 

E309-16 Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation

https://www.astm.org/e0309-16.html

 

WK78872 Revision of E309-16 Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation https://www.astm.org/products-services/standards-and-publications/standards/workitem-wk78872

 

E376-19 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods https://www.astm.org/e0376-19.html

 

WK89194 Revision of E376-19 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods

https://www.astm.org/products-services/standards-and-publications/standards/workitem-wk89194

 

E426-16(2021) Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

https://www.astm.org/e0426-16r21.html

 

E566-24 Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals

https://www.astm.org/e0566-24.html

 

WK89193 Revision of E566-19 Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals

https://www.astm.org/products-services/standards-and-publications/standards/workitem-wk89193

 

E570-20 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

https://www.astm.org/e0570-20.html

 

E571-24 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

https://www.astm.org/e0571-24.html

 

E690-15(2020) Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes https://www.astm.org/e0690-15r20.html

 

E703-20 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals

https://www.astm.org/e0703-20.html

 

E1004-23 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Methodhttps://www.astm.org/e1004-23.html

 

E1312-18 Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature

https://www.astm.org/e1312-18.html

 

WK90157 Revision of E1312-18 Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature

https://www.astm.org/products-services/standards-and-publications/standards/workitem-wk90157

 

E1571-21 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope

https://www.astm.org/e1571-21.html

 

E1606-20 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes

https://www.astm.org/e1606-20.html

 

E1629-12(2020) Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes

https://www.astm.org/e1629-12r20.html

 

E2096/E2096M-22 Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing

https://www.astm.org/e2096_e2096m-22.html

 

E2261/E2261M-17(2021) Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique

https://www.astm.org/e2261_e2261m-17r21.html

 

E2338-22 Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards

https://www.astm.org/e2338-22.html

 

E2884-22 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays

https://www.astm.org/e2884-22.html

 

E2905/E2905M-20 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods

https://www.astm.org/e2905_e2905m-20.html

​

E2928/E2928M-23 Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique

https://www.astm.org/e2928_e2928m-23.html

 

E3052-21 Standard Practice for Examination of Carbon Steel Welds Using An Eddy Current Array

https://www.astm.org/e3052-21.html

 

E376-19 ISO 15549:2019 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods

https://www.astm.org/e0376-19.html

 

E426-16(2021) Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

https://www.astm.org/e0426-16r21.html

 

B244-09(2021) Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

https://www.astm.org/b0244-09r21.html

 

STP722-EB Eddy-Current Characterization of Materials and Structures

https://www.astm.org/stp722-eb.html

 

E703-20 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals

https://www.astm.org/e0703-20.html

 

E309-24 Standard Practice for Eddy Current Examination of Steel Tubular Products

https://www.astm.org/e0309-24.html

 

E1629-12(2020) Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes

https://www.astm.org/e1629-12r20.html

 

E243-24 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes

https://www.astm.org/e0243-24.html

 

E1004-23 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method https://www.astm.org/e1004-23.html

 

STP27596S Theoretical Characterization and Comparison of Resonant-Probe Microwave Eddy-Current Testing with Conventional Low-Frequency Eddy-Current Methods

https://www.astm.org/stp27596s.html

 

STP41994S Eddy Current Measurement of Clad Thickness

https://www.astm.org/stp41994s.html

 

E571-24 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

https://www.astm.org/e0571-24.html

 

STP27591S Transient Eddy Current in Magnet Structure Members

https://www.astm.org/stp27591s.html

 

STP27598S Pulsed Eddy-Current Testing of Steel Sheetshttps://www.astm.org/stp27598s.html

 

E3052-21 Standard Practice for Examination of Carbon Steel Welds Using An Eddy Current Array

https://www.astm.org/e3052-21.html

 

STP41987S An Approach to Versatility in Eddy Current Testing

https://www.astm.org/stp41987s.html

 

E690-15(2020) Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes

https://www.astm.org/e0690-15r20.html

 

STP41987S An Approach to Versatility in Eddy Current Testing

https://www.astm.org/stp41987s.html

 

STP27580S A Macroscopic Model of Eddy Currents

https://www.astm.org/stp27580s.htmlSTP27586S An Eddy-Current Study of Casting https://www.astm.org/stp27586s.html

 

E2884-22 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays https://www.astm.org/e2884-22.html

 

Volume 25, Issue 1 Eddy Current Decay Resistivity Measurements Using a Digital Voltmeter

https://www.astm.org/jte11323j.html

 

E2338-22Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards

https://www.astm.org/e2338-22.html

 

STP41978S Introduction to Eddy Current Methods and Techniques

https://www.astm.org/stp41978s.html

 

E2934-23 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods

https://www.astm.org/e2934-23.html

 

E1606-20 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes https://www.astm.org/e1606-20.html

 

E1312-24 Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature

https://www.astm.org/e1312-24.html

 

STP27584S Eddy-Current Scanning of Graphite-Reinforced Aluminum Panels

https://www.astm.org/stp27584s.html

 

STP163720200083 Conventional versus Additive Manufacturing—Comparative Eddy Current Testing on Reference Blocks

https://www.astm.org/stp163720200083.html

 

STP27599S Investigation into the Depth of Pulsed Eddy-Current Penetration

https://www.astm.org/stp27599s.html

 

STP41983S Inspection of Small Diameter Tubing by Eddy Current Methods

https://www.astm.org/stp41983s.html

 

STP41985S Two Applications of Eddy Current Instruments to Testing of Zircaloy Core Components

https://www.astm.org/stp41985s.html

 

STP27585S An Eddy-Current Decay Technique for Low-Temperature Resistivity Measurements

https://www.astm.org/stp27585s.html

 

STP41993S Reduction of Probe-Spacing Effect in Pulsed Eddy Current Testing

https://www.astm.org/stp41993s.html

 

Volume 26, Issue 4 Eddy Current Decay and Resistivity Measurements on Longitudinally Grooved High-Purity Aluminum Bars

https://www.astm.org/jte12009j.html

 

STP27579S Application of Reference Standards for Control of Eddy-Current Test Equipment

https://www.astm.org/stp27579s.html

 

STP27593S Multifrequency Eddy-Current Method and the Separation of Test Specimen Variables

https://www.astm.org/stp27593s.html

 

STP17441S An Eddy Current Technique to Estimate Dimensions of Crevice Corrosion Pits

https://www.astm.org/stp17441s.html

 

STP41992S Minimizing the Effect of Probe-to-Metal Spacing in Eddy Current Testing

https://www.astm.org/stp41992s.html

 

STP27577S Eddy-Current Simulation in Prisms, Plates, and Shells with the Program EDDYNET

https://www.astm.org/stp27577s.html

 

STP27600S Design of a Pulsed Eddy-Current Test Equipment with Digital Signal Analysis

https://www.astm.org/stp27600s.html

 

STP27590S In-Service Inspection of Steam-Generator Tubing Using Multiple-Frequency Eddy-Current Techniques https://www.astm.org/stp27590s.html

 

Volume 40, Issue 4 In Situ Eddy-Current Testing on Low-Pressure Turbine Blades of Aircraft Engine

https://www.astm.org/jte103388.html

 

Volume 18, Issue 6 A Simplified Method for Determining Relaxation Time and Electrical Resistivity from Eddy-Current Decay Measurements

https://www.astm.org/jte12515j.html

 

Volume 45, Issue 5 LOI-Based Pulsed Eddy Current Evaluation of Hidden Material Degradation in Coated Nonmagnetic Conductors

https://www.astm.org/jte20160210.html

 

STP27587S In-Service Evaluation of Multifrequency/Multiparameter Eddy-Current Technology for the Inspection of PWR Steam-Generator Tubing

https://www.astm.org/stp27587s.html

 

STP162020180132 Eddy Current Technologies for Real-Time Monitoring and Post-Process Examination of Laser Powder Bed Fusion Process

https://www.astm.org/stp162020180132.html

 

Volume 46, Issue 1 Improvement of Measuring Accuracy for Coating Covered on Conical Steel Shells by Correction of Eddy Current Signals

https://www.astm.org/jte20160055.html

 

STP162020180132 Eddy Current Technologies for Real-Time Monitoring and Post-Process Examination of Laser Powder Bed Fusion Process

https://www.astm.org/stp162020180132.html

 

STP27603S Eddy-Current Testing of Thin Nonferromagnetic Plate and Sheet Materials Using a Facsimile-Recording Data Display Method

https://www.astm.org/stp27603s.html

 

STP27594S A Boundary Integral Equation Method for Calculating the Eddy-Current Distribution in a Long Cylindrical Bar with a Crackhttps://www.astm.org/stp27594s.html

 

STP13891S Detection of Irradiation Embrittlement of Low-Alloy Steel for Nuclear Reactor Pressure Vessels Using a Probe Type Eddy Current Sensor

https://www.astm.org/stp13891s.html

 

STP13948SAutomation of Fatigue Crack Growth Data Acquisition for Contained and Through-Thickness Cracks Using Eddy-Current and Potential Difference Methods

https://www.astm.org/stp13948s.html

 

Volume 48, Issue 1Examination of the Effects of Homogeneity and Anisotropy on Coating Thickness and Properties in Reinforced Carbon–Carbon by Eddy Current Testing

https://www.astm.org/jte20180916.html

 

Volume 42, Issue 4A Thickness Nondestructive Evaluation Strategy for Coating Located in Truncated Conical Steel Shells of Various Sizes Based on Eddy Current Testing Technology

https://www.astm.org/jte20130135.html

 

STP27576SNumerical Solution of Electromagnetic-Field Eddy-Current Problems in Linear and Nonlinear Metallic Structures: The RMS Phasor and Instantaneous Approaches as Potential Tools in Nondestructive Testing Applications

https://www.astm.org/stp27576s.html

 

STP41982SAn Eddy Current Test for Capillary Tubing

https://www.astm.org/stp41982s.html

 

STP27595SMicrowave Eddy-Current Techniques for Quantitative Nondestructive Evaluationhttps://www.astm.org/stp27595s.html

 

STP42003SEddy Current Techniques for Testing Liquid Metal Bonding

https://www.astm.org/stp42003s.html

 

STP27597SMicrowave Eddy-Current Experiments with Ferromagnetic Resonance Probes

https://www.astm.org/stp27597s.html

 

STP27592SAdvanced Multifrequency Eddy-Current System for Steam-Generator Inspection

https://www.astm.org/stp27592s.html

 

STP27604SPattern-Recognition Methods for Classifying and Sizing Flaws Using Eddy-Current Data

https://www.astm.org/stp27604s.html

 

STP27589SOpitimization of a Multifrequency Eddy-Current Test System Concerning the Defect Detection Sensibility

https://www.astm.org/stp27589s.html

 

E215-22 Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube

https://www.astm.org/e0215-22.html

 

STP45885SPrediction of Strength of Graphitic Material by Nondestructive Test Techniques

https://www.astm.org/stp45885s.html

 

STP15352SNondestructive Characterization for Metal-Matrix Composite Fabrication

https://www.astm.org/stp15352s.html

 

Volume 3, Issue 1Signal Processing in Nondestructive Testing

https://www.astm.org/jte10130j.html

 

STP45883SNondestructive Testing of Graphite at the Los Alamos Scientific Laboratory

https://www.astm.org/stp45883s.html

 

Volume 46, Issue 3A Strategy for Inspection of Cracks in a Thick Structure Using an ECT Probe

https://www.astm.org/jte20160402.html

 

Volume 41, Issue 4A Non-Destructive Evaluation Strategy for Thick Coating Evaluation on Hemispherical Steel Shells of Different Sizes with a Wide-Range ECT Sensor

https://www.astm.org/jte20120206.html

 

Volume 19, Issue 4Electrical Resistance Measurements on Type 304 Stainless Steel with Different Degrees of Sensitization

https://www.astm.org/jte12576j.html

 

STP27605SAutomatic Detection, Classification, and Sizing of Steam-Generator Tubing Defects by Digital Signal Processing

https://www.astm.org/stp27605s.html

 

STP17818SNew and Old Technology Available for Pavement Management System to Determine Pavement Condition

https://www.astm.org/stp17818s.html

 

Volume 39, Issue 3Applications of Non-Destructive Testing (NDT) in Vehicle Forgery Examinations

https://www.astm.org/jfs13652j.html

 

STP44518SNondestructive Testing of Solid Propellant Missile Motors

https://www.astm.org/stp44518s.html

 

STP27583SHigh Peak Energy Shaped-Pulse Electromagnetic Crack Detection

https://www.astm.org/stp27583s.html

 

Volume 13, Issue 6A New Method for Compliance Measurements for Fatigue Crack Growth Testing in Autoclaves

https://www.astm.org/jte10974j.html

 

Volume 15, Issue 2Improved Impulse-Frequency Response Techniques for Measurement of Dynamic Mechanical Properties of Composite Materials

https://www.astm.org/jte10991j.html

 

STP27583SHigh Peak Energy Shaped-Pulse Electromagnetic Crack Detection

https://www.astm.org/stp27583s.html

 

STP27582SHigh-Accuracy Conductivity Measurements in Nonferrous Metals

https://www.astm.org/stp27582s.html

 

STP27042SThe National Bureau of Standards Program in Nondestructive Evaluation

https://www.astm.org/stp27042s.html

 

Volume 4, Issue 1Instruments for Inspection of Coatings

https://www.astm.org/jte10504j.html

 

Volume 9, Issue 5Design of a Dynamic Gear Test Rig

https://www.astm.org/jte11522j.html

 

STP41977SNondestructive Testing in the Nuclear Energy Field

https://www.astm.org/stp41977s.html

 

STP33892SUnit Operations for Nonferrous Metals Recovery

https://www.astm.org/stp33892s.html

 

STP23813SRecent Developments in NDE Measurements and Standards at NIST

https://www.astm.org/stp23813s.html

 

E2905/E2905M-20 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods

https://www.astm.org/e2905_e2905m-20.html

 

 E2096/E2096M-22 Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing

https://www.astm.org/e2096_e2096m-22.html

 

Volume 11, Issue 1Microstructural Evolution of Inconel 718 during Aging and Its Correlation with Electric Conductivity Measurements

 

https://www.astm.org/mpc20220035.html

 

STP46182SSubsurface Exploration by Sonar Seismic Systems

https://www.astm.org/stp46182s.html

 

Volume 11, Issue 1Microstructural Evolution of Inconel 718 during Aging and Its Correlation with Electric Conductivity Measurements

https://www.astm.org/mpc20220035.html

 

Volume 28, Issue 4Development of a Machine for Closely Controlled Rolling Contact Fatigue and Wear Testing

https://www.astm.org/jte12104j.html

 

STP44442SSome Nondestructive Tests for Filament-Wound Structures

https://www.astm.org/stp44442s.html

 

Volume 26, Issue 3Piezo-Actuated Microtensile Test Apparatus

https://www.astm.org/jte11999j.html

 

STP15220SEffects of Pressurized Water Reactor (PWR) Coolant Chemistry on Zircaloy Corrosion Behavior

https://www.astm.org/stp15220s.html

 

STP17433SNeutron Radiographic Detection of Corrosion

https://www.astm.org/stp17433s.html

 

Volume 51, Issue 6Intelligent Detection to Laser Welding Seam Defect Using Adaptive Joint Wavelet Dictionary Learning of PEC Signal

https://www.astm.org/jte20220656.html 

 

B515-22 Standard Specification for Welded Nickel-Iron-Chromium Alloy Tubes

https://www.astm.org/b0515-22.html

 

Volume 49, Issue 1Enhancement of Defect Detectability in Pneumatic Pressure Equipment Using an Automatic Detection Technique in ECPT

https://www.astm.org/jte20180724.html

 

STP12148SThe Application of Resonance Ultrasound Spectroscopy to Bearing Rollers

https://www.astm.org/stp12148s.html

 

STP42011SNickel Depth Meter

https://www.astm.org/stp42011s.html

 

STP28488SNondestructive Evaluation of Damage in FP/Aluminum Composites

https://www.astm.org/stp28488s.html

 

STP20035STesting of Anodic Coatings on Aluminum Alloys: A Review

https://www.astm.org/stp20035s.html

 

STP47235SCrack Propagation in Clad 7079-T6 Aluminum Alloy Sheet Under Constant and Random Amplitude Fatigue Loading https://www.astm.org/stp47235s.html

 

 D7378-16(2024) Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness

https://www.astm.org/d7378-16r24.html

 

F2213-17 Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment

https://www.astm.org/f2213-17.html

 

Volume 46, Issue 3Variable Slip Ratio Rolling Contact Fatigue Tester

https://www.astm.org/jte20160039.html

 

Volume 3, Issue 6Characterization of Galvanized Sheet Steel for Automotive Vehicle Bodies

https://www.astm.org/jte11696j.html

 

STP162220190010Experimental Simulation of the Behavior of E110 Claddings under Accident Conditions Using Electrically Heated Bundleshttps://www.astm.org/stp162220190010.html

 

STP19334SPreventing Fracture By Inspection and Analysis

https://www.astm.org/stp19334s.html

 

STP87019850008Mechanical Burst Properties of Irradiated and Annealed Zircaloy Fuel-Rod Cladding

https://www.astm.org/stp87019850008.html 

 

E3013/E3013M-17(2022) Standard Test Method for Evaluating Concrete Pavement Dowel Bar Alignment Using Magnetic Pulse Induction

https://www.astm.org/e3013_e3013m-17r22.html

 

E1476-04(2022) Standard Guide for Metals Identification, Grade Verification, and Sorting

https://www.astm.org/e1476-04r22.html

 

STP11360SStatistical Analysis of Pitting Corrosion in Condenser Tubes

https://www.astm.org/stp11360s.html

 

STP49291SDevelopment of a Sliding-Rolling Contact Fatigue Tester

https://www.astm.org/stp49291s.html

 

STP16418SFracture Toughness and Critical Crack Sizes for the Space Shuttle Solid Rocket Motor D6AC Steel Case

https://www.astm.org/stp16418s.html

 

STP11416SQuantitative Assessment of Irradiation Effect on Creep and Corrosion Properties of Zr-Base Alloys

https://www.astm.org/stp11416s.html

 

Volume 36, Issue 2New Approach to Resonant Column Testing

https://www.astm.org/gtj20120122.html

 

STP154320130008Performance and Property Evaluation of High-Burnup Optimized ZIRLO™ Cladding

https://www.astm.org/stp154320130008.html

 

A1012-10(2021) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

https://www.astm.org/a1012-10r21.html

 

STP164520220021E110opt Fuel Cladding Corrosion under PWR Conditions

https://www.astm.org/stp164520220021.html

 

STP154320130008Performance and Property Evaluation of High-Burnup Optimized ZIRLO™ Cladding

https://www.astm.org/stp154320130008.html

 

STP17439SAn Automated Ultrasonic Data Acquisition and Evaluation System

https://www.astm.org/stp17439s.html

 

B705-24 Standard Specification for Nickel-Chromium-Molybdenum-Niobium Alloy, Nickel-Chromium-Molybdenum-Silicon Alloy, and Nickel-Iron-Chromium-Molybdenum-Copper Alloy Welded Pipe

https://www.astm.org/b0705-24.html

 

B466/B466M-18 Standard Specification for Seamless Copper-Nickel Pipe and Tube

https://www.astm.org/b0466_b0466m-18.html

 

B706-24 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube

https://www.astm.org/b0706-24.html

 

A877/A877M-17(2023) Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality

https://www.astm.org/a0877_a0877m-17r23.html

 

Volume 1, Issue 1Optimization of an Induction Hardening Process for a Steel Gear Component

https://www.astm.org/mpc104397.html

 

B676-19(2024) Standard Specification for UNS N08367 Welded Tube

https://www.astm.org/b0676-19r24.html

 

B302-17 Standard Specification for Threadless Copper Pipe, Standard Sizes

https://www.astm.org/b0302-17.html

 

Volume 6, Issue 2In PWR Comprehensive Study of High Burn-Up Corrosion and Growth Behavior of M5 and Recrystallized Low-Tin Zircaloy-4

https://www.astm.org/jai101314.html

 

B467-14(2022) Standard Specification for Welded Copper-Nickel Pipe

https://www.astm.org/b0467-14r22.html

 

B674-21 Standard Specification for Nickel-Iron-Chromium-Molybdenum and Iron-Nickel-Chromium-Molybdenum-Copper Welded Tube

https://www.astm.org/b0674-21.html

 

B626-19 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

https://www.astm.org/b0626-19.html

 

B903-15(2022) Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement

https://www.astm.org/b0903-15r22.html

 

A376/A376M-22 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service

https://www.astm.org/a0376_a0376m-22.html

 

E588-03(2020) Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method

https://www.astm.org/e0588-03r20.html

 

B514-05(2019) Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe

https://www.astm.org/b0514-05r19.html

 

E543-21 Standard Specification for Agencies Performing Nondestructive Testing

https://www.astm.org/e0543-21.html

 

B743-23 Standard Specification for Seamless Copper Tube in Coils

https://www.astm.org/b0743-23.html

 

B819-19 Standard Specification for Seamless Copper Tube for Medical Gas Systems

https://www.astm.org/b0819-19.html

 

B508-22 Standard Specification for Copper Alloy Strip for Flexible Metal Hose

https://www.astm.org/b0508-22.html

 

B516-24 Standard Specification for Welded Nickel-Chromium-Aluminum Alloy and Nickel-Chromium-Iron Alloy Tubes

https://www.astm.org/b0516-24.html

 

E3147-18 Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems

https://www.astm.org/e3147-18.html

 

B75/B75M-20 Standard Specification for Seamless Copper Tube

https://www.astm.org/b0075_b0075m-20.html

 

B280-23 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

https://www.astm.org/b0280-23.html

 

B306-20 Standard Specification for Copper Drainage Tube (DWV)

https://www.astm.org/b0306-20.html

 

B407-22 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

https://www.astm.org/b0407-22.html

 

B369/B369M-24 Standard Specification for Copper-Nickel Alloy Castings

https://www.astm.org/b0369_b0369m-24.html

 

E3166-20e1 Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build

https://www.astm.org/e3166-20e01.html

 

E2339-21 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

https://www.astm.org/e2339-21.html

 

A135/A135M-21 Standard Specification for Electric-Resistance-Welded Steel Pipe

https://www.astm.org/a0135_a0135m-21.html

 

B891/B891M-19(2024) Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer

https://www.astm.org/b0891_b0891m-19r24.html

 

B188-15(2023) Standard Specification for Seamless Copper Bus Pipe and Tube

https://www.astm.org/b0188-15r23.html

 

B587-19 Standard Specification for Welded Brass Tube

https://www.astm.org/b0587-19.html

 

A1016/A1016M-24 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

https://www.astm.org/a1016_a1016m-24.html

 

B43-20 Standard Specification for Seamless Red Brass Pipe, Standard Sizes

https://www.astm.org/b0043-20.html

 

B491/B491M-23 Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications

https://www.astm.org/b0491_b0491m-23.html

 

D8093-19 Standard Guide for Nondestructive Evaluation of Nuclear Grade Graphite

https://www.astm.org/d8093-19.html

 

E3209/E3209M-20 Standard Test Method for Pavement Thickness by Magnetic Pulse Induction

https://www.astm.org/e3209_e3209m-20.html

 

B135/B135M-17 Standard Specification for Seamless Brass Tube

https://www.astm.org/b0135_b0135m-17.html

 

E3209/E3209M-20 Standard Test Method for Pavement Thickness by Magnetic Pulse Induction

https://www.astm.org/e3209_e3209m-20.html

 

B135/B135M-17 Standard Specification for Seamless Brass Tube

https://www.astm.org/b0135_b0135m-17.html

 

B543/B543M-18 Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

https://www.astm.org/b0543_b0543m-18.html

 

E2862-23 Standard Practice for Probability of Detection Analysis for Hit/Miss Data

https://www.astm.org/e2862-23.html

 

B447-12a(2021) Standard Specification for Welded Copper Tube

https://www.astm.org/b0447-12ar21.html

 

E2906/E2906M-18(2022) Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles

https://www.astm.org/e2906_e2906m-18r22.html

 

B111/B111M-24 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

https://www.astm.org/b0111_b0111m-24.html

 

B956-19e1 Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins

https://www.astm.org/b0956-19e01.html

 

D7091-22 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

https://www.astm.org/d7091-22.html

 

B359/B359M-23 Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

https://www.astm.org/b0359_b0359m-23.html

 

D6820-20 Standard Guide for Use of the Time Domain Electromagnetic Method for Geophysical Subsurface Site Investigation

https://www.astm.org/d6820-20.html

 

E2981-21 Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications

https://www.astm.org/e2981-21.html

 

E2982-21 Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications

https://www.astm.org/e2982-21.html

 

STP47751SRequirements for Turbine and Generator Rotor Forgings

https://www.astm.org/stp47751s.html

Sample of EPRI Documents

The Electric Power Research Institute (EPRI) has over 2000 documents related to eddy current testing, surface and tubing.  Most documents require an EPRI membership to download, but some are available at no charge.  Check out a few of the links below to familiarize yourself with the EPRI website.  Most EPRI members are electric utilities, and they pay an annual fee to access the EPRI docs.

Conventional Surface Eddy Current Application Guide

​

Materials Reliability Program: Technical Basis for Surface Eddy Current Demonstration in Materials Susceptible to Stress Corrosion Cracking (MRP-423)

​

Field Inspection Handbook for Condensers

​

Guidelines for the Nondestructive Examination of Heat Recovery Steam Generators

​

Nondestructive Evaluation: Depth Sizing of Cracks in Surface Examination of Nonmagnetic Materials with Electromagnetic Methods

​

Steam Generator Tubing Outside Diameter Stress Corrosion Cracking at Tube Support Plates Database for Alternate Repair Limits: Update 2004

​

NDE for Carbon Steel Heat Exchanger Tube Support Plates and Tube Fretting

​

Field Guide: Generator Nondestructive Evaluation (NDE)

​

Phased Array Examination Methodology for Curved Axial-Entry Turbine Blade Attachments

​

Field Evaluation of Pulsed Eddy Current

​

Eddy Current NDE System for On-Site Inspection

​

Balance-of-Plant (BOP) Electromagnetic Nondestructive Evaluation Guide for Engineers: Best Practices to Successfully Execute an Eddy Current Inspection Campaign

​

Fuel Rod Defect Characterization Using Eddy Current Array Technique

​

Automated Analysis of Rotating Probe Eddy Current Data

​

Eddy Current Data Quality Parameters for Inspection of Steam Generator Tubes: Volume 1: Bobbin Coil Probe

​

Eddy Current Data Quality Parameters for Inspection of Steam Generator Tubes: Volume 2: Rotating +Point Probe

​

​

bottom of page